Craftsman 107.28993 - Manual (Page 33)

MOWER DECK WASHOUT PORT
NOTE: The washout port allows you to connect a typical
garden hose to the trim side (L.H.) of the mower deck to
remove grass and debris from the underside. This
ensures proper and safe operation of the mower.
1. Place the lawn tractor on a smooth level surface.
Figure 41. Mower Deck Washout Port
A. Quick Disconnect
B. Hose
C. Washout Port
WARNING
Before running the mower, make sure the hose is
properly connected and does not come into contact
with the blades. When the mower is running and the
blades are engaged, the person cleaning the mower
deck must be in the operator position, and there are
no bystanders. Failure to follow these precautions
may result in serious injury or death.
2. Attach the quick disconnect (A, Figure 41) to garden
hose (B) and connect to washout port (C) on mower
deck.
3. Turn the mower on and place in the highest cutting
position.
4. Run water to remove grass and debris from under-
side of mower deck.
5. Turn the mower off.
6. Remove the garden hose and quick disconnect from
the washout port when completed.
33
B
C
A
Not
for
Reproduction