CITIZEN CT-S851 - Manual (Page 39)

— 35 —
Printing memory switch settings
1. While paper is loaded, press and hold button 1 while turning the power on.
The function test mode starts and “Self test” appears on the LCD.
2. Press button 3 ( ).
“Printing MSW” appears on the LCD.
3. Press button 4 ( ).
A list of the current memory switch settings starts
printing.
The function test mode has the following sub modes.
Note:
*: The memory switches are automatically set to their optimum settings by selecting the manufacturer
and model of the printer being replaced.
Function Description
Self test Runs self test.
Printing MSW Prints memory switch settings.
Quick Setting * Sets the memory switches to be compatible with
specific models.
Selected item Automatic memory switch settings
Manufacturer Model
Paper
width
Character
space
MSW2-4
Full Col
Print
MSW3-7
CBM1000
Mode
MSW8-1
Print
Width
MSW6-2
Character
Space
CITIZEN CBM1000 58 mm — Auto
linefeed Valid 432dots —
80 mm — Auto
linefeed Valid 576dots —
CT-S300 58 mm — WaitData Invalid 384dots —
80 mm — WaitData Invalid 576dots —
CT-S2000 58 mm — Auto
linefeed Valid 432dots —
60 mm — Auto
linefeed Valid 436dots —
80 mm — Auto
linefeed Valid 576dots —
83 mm — Auto
linefeed Valid 640dots —
EPSON T88 58 mm 0dot WaitData Invalid 360dots 0dot
1dot WaitData Invalid 390dots 1dot
80 mm 0dot WaitData Invalid 512dots 0dot
1dot WaitData Invalid 546dots 1dot
203dpi 58 mm — WaitData Invalid 420dots —
60 mm — WaitData Invalid 436dots —
80 mm — WaitData Invalid 576dots —
FEED