Step 4: adding a vcr and audio system, 9' tip, V'tip – Sony SAT-A55 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

step 4: Adding a VCR and Audio System

You can record programs by adding a VCR. You can also connect your
Digital Satellite Receiver to an audio system for enhanced sound
enjoyment.

Audio Receiver

r-a-Cl

Optical Cable
(SAT-A55 only)

(optional Sony
accessory POC-15A)

0 If you have a

digital or Dolby

Digital audio
system (SAT-A55

only)

Connect the

DIGITAL OUT
(OPTICAL) of the
Digital Satellite
Receiver to the

optical digital
input of your audio
system.

'9' Tip

If you connect your
Digital Satellite
Receiver to a Dolby
Digital receiver, set
the Dolby Digital

option of the Audio
display to Auto
Select. See "Setting
Audio Options

(AUDIO)" on page

64 for more
information.

© if your TV and VCR have A/V

jacks

Cormect the VIDEO OUT jacks of
your Digital Satellite Receiver to
the A/V input jacks of your VCR
using the supplied A/V cable.
Theiv connect the A/V output

jacks of your VCR to the A/V

input jacks of your TV using an

A/V

cable. (Be sure to match the

colors on the jacks with the
colored plugs on the A/V cable.'

© If your TV and VCR have

S-Video jacks

Use rm S-Video cable instead of

the yellow video coimection.

S-Video cable is supplied with

the SAT-A55 model and is an
optional accessory with the

SAT-B55 model.

V'Tip

To allow your Digital Satellite

Receiver to control the recording
functions of your VCR, see "Step
5; Cormecting the VCR
Controller" on page 11.

© If you have a stereo

or Dolby® Pro Logic®
audio system

Connect the upper
AUDIO R and L(MONO)
jacks on the Digital
Satellite Receiver to the
audio inputs of your
stereo amplifier.

yapTiCAj.

1 M

VHmjHF

SVD60

VO60

IfMONOt
■4UOO-
R

If your TV and VCR do
not have A/V jacks

Cormect the VHF(SAT)/
UHF OUT jack on the
Digital Satellite Receiver to
the VHF/UHF input jack
on your VCR using coaxial
cable.
Then, connect the VHP /

UHF output jack on your
VCR to the VHF/UHF
input jack on your TV using
coaxial cable.
Set the CH3/CH4 switch to

the chaimel that does not
carry off-air broadcasts in
your area.

Note

With this connection,
your input source is
channel 3 or charmel 4
depending on how you
set the CH3/CH4 switch
on your VCR.

10

Advertising
This manual is related to the following products: