Sony CCD-TR9 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Locate the end point where the insert should end
by pressing or ^ during playback.
The viewfinder screen shows a high-speed
playback picture.
®REW FF®
&
3
At
the end point, press RESET.
The counter resets to “0:00:0”.
RESET
COUNTER
0:00:00
In the display window
Locate the start point where the insert
should begin by pressing
REW®
5 At the start point, put the camcorder into recording
standby mode.
PAUSE
15
•REC-*.
6
Press ZERO MEM.
The end point of the insert is stored in memory.
ZETOMEM Jiigplay vvindow
Inside the viewfinder
Press II on both the camcorder and the VCR to
start insert editing.
You can monitor the picture being inserted inside
the viewfinder screen.
The insert recording stops automatically near the
zero point on the counter.
PAUSE
15
To change the end Press ZERO MEM so that the ZERO MEM indication disappears, and begin from
point
step 2.
Chapter 3: Advanced Operation
53