Sony CCD-TRV66 User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Viewfinder (p. 16)
EJECT switch (p, 13)
LANC U control jack
LANC stands for Local Application
Control Bus System. The ti control jack
is used for controlling the tape transport
of video equipment and other
peripherals cormected to the video
equipment. This jack has the same
function as the jack indicated as
CONTROL L or REMOTE.
Cassette compartment (p. 13)
Grip strap
S VIDEO jack (p. 26)
Built-in light
(p. 47)
LIGHT switch
(p. 47)
RFU DC OUT (RFU adaptor DC output)
jack
(p. 26)
MIC jack (PLUG IN POWER)
Connect an external microphone
(not supplied). This jack also accepts
a "plug-in-power" microphone.
If you connect a 2-pin microphone,
supply power from DC OUT jack.
In this case, WIND in the MENU
settings does not function.
VIDEO/AUDIO jacks
(p. 26)
0 (headphones) jack
When you use headphones, the speaker
on your camcorder is silent.
Fastening the grip strap
79