The vcr plus-f system channel setup, Automatic clock setting (slv-679hf/679hf px only) – Sony SLV-662HF User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Hookups (continued)
Hookup 1:
The VCR Plus-f system channel setup
1
Find the VCR Plus+ system Channel Listing in your program guide.
For details, see page 40.
2
If the channels in the program guide are different from the channels
that you actually use on your TV, set the channels that are different as
follows. For details, see page 41.
O
Press MENU, then select SETTINGS and press
OK.
© Select SET VCR Plus+ CHANNELS and press
OK
© Enter the program guide channel, then the
channel you use on your TV.
O
Press OK.
© Press MENU to exit the menu.
Program guide channel
Your actual TV channel
Automatic clock setting (SLV-679HF/679HF PX only)
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking
up a
time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see
page 26.
17 ! Gettinn Started