Canon 700 - Manual (Page 150)

148
If the event dialog fails to appear, click the [Start] menu, and select
[Programs] or [All Programs], followed by [Canon Utilities],
[CameraWindow], and [CameraWindow].
• Slip a fingernail under the bottom edge of the camera's DIGITAL
Terminal cover, lift it up and plug the interface cable in all the way.
• Treat the connector area with great care while you attach and remove
the interface cable.
• Always grasp the connector’s sides to remove the interface cable
from the camera's DIGITAL terminal.
3 Turn the mode dial to (Playback).
4 Press the power button until the power lamp lights green.
5 Select [Canon CameraWindow] in the event dialog that
appears on the computer and click [OK] (first time only).
USB Port
DIGITAL Terminal
Interface Cable