H] sleep button, 2] system standby switch, 3] av 1/6 switch – Sony RM-PP402 User Manual

Page 5: 5] function buttons, Notes, I master volume +/- buttons, I muting button

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

H] SLEEP button

Press repeatedly to activate the sleep function and the
duration which the receiver turns off automatically.

[2] SYSTEM STANDBY switch

Press to turn off the receiver and other Sony audio/
video components at the same time.

[3] AV 1/6 switch

Press to turn the audio and video components on or
off.

5] Function buttons

Press one of the buttons to select the component you
want to use. When you press a button, the receiver
turns on.

To select

Press

VCR

VIDEOl (VCR mode 3), VIDE02
(VCR mode 1), or VIDE03 (VCR
mode ^

DVD

DVD

TV

TV

Tape deck

TAPE

MD deck

MD

CD player

CD

Built-in tuner

TUNER

Turntable

PHONO

the component connected
to the 5.1CH INPUT jacks

5.1CH

on the receiver

a) Sony VCRs become operable when you press the VIDEOl, 2, or

3 button. These buttons correspond to VHS, Beta, and 8mm,
respectively.

To select an LD player or satellite tuner (etc.) press the
button for the function to which you connected the
component.

Note.that the function buttons are factory-set as
described in the table above. If you want to change
the factory setting of the buttons to match your
particular components, do the procedure "Changing
the Factory Settings of a Function Button" on page 12.

Notes

• Before you turn on the receiver, make sure that you have

turned the MASTER VOLUME control on the receiver to
the leftmost position to avoid damaging your speakers.

• After you have selected VCR or DVD player, turn on the

TV and set the TV's video input to match the component

you selected.

I

MASTER VOLUME +/- buttons

Press to adjust the volume level of all speakers at the
same time.

If you have pressed the TV CONTROL button:
Press to adjust the volume level of the TV speakers.

I

MUTING button

Press to mute the sound. The MUTING indicator on
the receiver lights up when the sound is muted.

If you have pressed the TV CONTROL button:
Press to mute the sound from the TV.

■0

ft)

Vt

ft)

3

a

OP

ft)

3P

n

3

o

io

o

■D

<0

See the table on page 10 for information on the buttons
you can use to control each component.

Advertising