Sony DVP S530D - Manual (Page 55)

Additional
Information
Troubleshooting
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.
Power
The power is not turned on.
If the indicator above the l/(!) (POWER) button is
not lit, check that the AC power cord is connected
securelv-
Picture
There is no picture.
Check that the player is connected securely.
The video connecting cord is damaged. Replace it
with a new one.
Make sure you connect the player to the video
input connector on the TV (page 8).
"♦ Make sure you turn on the TV.
Make sure you select the video input on the TV so
that vou can view the pictures from the plaver.
The picture noise appears.
“► Clean the disc.
If video from vour DVD player has to go through
vour VCR to get to vour TV, the copv-protection
applied to some DVD programs could affect
picture quality. If you still experience problems
after checking vour connections, please trv
■ connectmgA'Our DVD player directly to your TV's
S video-input, if vour T\^ is equipped with this
input (page 8).
The aspect ratio of the screen cannot be changed
even though you set "TV TYPE" in "SCREEN
SETUP" in the setup display when you play a
wide picture.
The aspect ratio is fixed on your DVD.
If you connect the player with the S video cable,
connect directly to the TV. Otherwise, you may' not
change the aspect ratio.
“► Depending on the TV, you may not change the
aspect ratio.
The numbers or letters of 5 characters are
displayed on the screen.
“► Self-diagnosis function was activated. See the
table m page 58 and heat the player appropriately'.
>
a
a
o’
3
aj_
□
o
3
o’
3
55