Setups for the player – Sony DVP-S550D User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

If you have a digital component such as a
receiver (amplifier) with a digital connector, DAT

or MD

Connect the component via the DIGITAL OUT OPTICAL or

. COAXIAL connector using an optical or coaxial digital ^

connecting cord (not supplied).

When you play a DVD, set "DIGITAL OUT" in "AUDIO SETUP"

to "ON" and then set "DOLBY DIGITAL" to "D-PCM" and

"DTS" to "OFF" in the setup display, (page 56)

■ When using an optical digital connecting cord

Optical digital connecting cord

<I3=>------------------------------

(not supplied)

Take off the cap and plug in the optical digital connectmg cord.

Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.

DIGITAL IN 1

CD/DVD player

DIGITAL OUT

QJ

DClBV DIGITAL '

Q!

I

when using a coaxial digital connecting cord

Coaxial digital connecting cord
(not supplied)

CD/DVD player

Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.

Notes

• Refer to the instructions supplied with the component to be

connected.

• You cannot make digital audio recordings of discs recorded in

multi-channel surround format directly using an MD deck or

DAT deck.

When you make the connections above, do not set

"DOLBY DIGITAL" to "DOLBY DIGITAL" and "DTS" to

"ON." If you do, a loud noise will suddenly come out

from the speakers, affecting your ears or causing the

speakers to be damaged.

If you have an audio component with a built in
DTS decoder or Dolby Digital decoder

Connect the component via the DIGITAL OUT OPTICAL or

COAXIAL connector using an optical or coaxial digital

cormecting cord (not supplied).

■ When you play a DVD or CD that are recorded in DTS

format

Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and then

set "DTS" to "ON" in the setup display, (page 56)

■ When you play a DVD that is recorded

in

Dolby Digital

format

Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and then

set "DOLBY DIGITAL" to "DOLBY DIGITAL" in the setup

display, (page 56)

CD/DVD player

Optical or coaxial digital
connecting cord

Audio component
with a built in

DTS decoder or
DOLBY DIGITAL
decoder

J

-d

-a

—D

Speakers

Notes

• Refer to the instructions supplied with the component to be

connected.

• When you do not connect an audio component with a built

in DTS decoder, do not set "DTS" to "ON."

• When you do not connect an audio component with a built

in DOLBY DIGITAL decoder, do not set "DOLBY DIGITAL" to

"DOLBY DIGITAL."

Setups for the player

Some setups are necessary' for the player depending on

the components to be connected.

U.se the setup display' to change the various settings.

For details on using the setup display, see page 47.

• To listen to the sound through speakers connected

to a receiver (amplifier) having a digital connector or
to output the sound to a digital component such as

a DAT or MD deck
When you play a DVD, set "DIGITAL OUT" in

"AUDIO SETUP" to "ON" and then set "DOLBY

DIGITAL" to "D-PCM" and "DTS" to "OFF" in the

setup displav (page 56). These are the default .settings.

Cl

IS

3

IQ

fi)

:x

n

a

1 1

Advertising