Scarlett SC-141 - Manual (Page 5)

www.scarlett-europe.com SC-141 5
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
· For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described
in this instruction manual.
· Do not use outdoors.
· Always unplug the appliance from the power supply before cleaning and when not in use.
· To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids.
· Close supervision is necessary when it is used near children.
· Do not leave the appliance switched on when not in use.
· Do not use other attachments than those supplied.
· Do not operate after malfunction or cord damage.
· Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
· Keep the cord away from sharp edges and hot surfaces.
· Do not pull, twist, or wrap the power cord around appliance.
· Never attempt to take food or liquid out from the container when the blade is moving. Always wait until the motor stops
completely.
· Do not overload the appliance with food.
· The appliance operates fast and effective. Do not operate continuously for more than 1 min.
· Never place hot ingredients into processor (> 70 ºC) .
FOOD PROCESSOR ASSEMBLING
· Before the first using, wash all removable parts in warm soapy water, rinse thoroughly and dry. Wipe the housing with a
damp cloth.
· Never immerse motor body in any liquid or wash under running water.
· Place the bowl on a level surface.
CUTTING KNIFE / WHISK STICK (pic.2)
· Attach the cutting knife or mixing attachment onto the blade supporter in the bowl.
· Load products to be processed in the bowl.
GRATING / SLICING DISC (pic.1)
· Insert the spindle into the center of the reversible grating/slicing disc so that the three protrusions around the spindle
penetrate the three slots around the center of the disc. Rotate the disc by gripping the spindle and go as far as it can in
order to lock it into the disc.
· For grating it must be with the grating blade side facing up.
· For slicing turn it over.
· For cutting French-fries fit proper disc.
WHISK BLADE (pic.2)
· Whisk blade is used for mixing egg whites cream and mayonnaise.
· Do not blend pure liquids (water, milk etc.)
· Never use the whisk blade to knead heavy dough.
FOOD PROCESSOR USING
· Attach the lid on top of the bowl then the motor unit onto the lid.
· Please make sure accessories are at their places before switching on.
· Plug-in device.
· Before processing cut food so it would pass through a feeder easily.
· Turn control switch to speed , so food processor will work continuously until you turn back to "0" (switch off a speed).
PULSE MODE
· Turn the Speed control switch to Pulse position. Press and retain the Pulse button - food processor will operate till
this button is pressed.
CAUTION: Use the pusher only to feed products, push it evenly and gently. The heavier pressure, the coarser chopping.
CAUTION: Do not operate continuously longer than 1 minute with less than 2 minute intermission.
· Do not overload the appliance by putting in too much food.
· Do not remove any parts during the operating.
CLEANING AND CARE
· Switch off and unplug the appliance.
· Wash the accessories immediately and avoid soaking them in water for long periods; wash in warm sudsy water after
each use. Dry all accessories with a clean soft cloth. Do not use a dishwashing machine.
· Wipe housing with a damp cloth.
· Do not use scouring pads, abrasive and harsh detergents.
CAUTION: The blades are extremely sharp and therefore dangerous. handle with caution!
STORAGE
· Be sure that the appliance is unplugged.
· Complete all requirements of Chapter CLEANING AND CARE.
· Keep the appliance in a dry clean place.