Sony CCD-TR500 - Manual (Page 26)

Identifying the Parts
[f| Menu operation buttons (p 33)
MENU
ITEM
SET
[2] FOCUS button (p 30)
[¿) Focus dial (p.30)
[4j AUTO LOCK cover (p 29)
EXPOSURE button (p 31)
[6] Exposure dial (p 31)
[7| PROGRAM AE button (p 32)
[8] Viewfinder lens adjustment lever (p.i3)
[9] STEADY SHOT switch {p 16)
PHONES (headphones) jack (stereo) (p.l8)
5.iJ REMOTE (LANC) control jack
Connect the LANC connecting cable to a
wired remote control unit such as a editing
controller. In this case, set the REMOTE
COMMANDER mode to OFF in the menu
system (p.32).
C stands for Local Application Control Bus
System. The control jack is used for
controlling the tape transport of video
equipment and peripherals connected to it.
This jack has the same function as the
connectors indicated as CONTROL L or
REMOTE.
[i| RFU DC OUT (RFU adaptor DC out) jack
(p.19)
Щ VIDEO/AUDIO jacks (p.19)
S VIDEO jack (4-pin mini-DIN connector)
(p,19)
OJ Lithium battery compartment (p.9)
[l| ВАТТ (battery) release key (p 7)
t7] POWER ZOOM lever (p.17)
[t| Hook for shoulder strap (below)
[i| Jack cover
Battery compartment (p.7)
gi] STANDBY cover (p.15)
P START/STOP button (p. 15)
Hook for shoulder strap (below)
Grip strap (p 14)
S Cassette compartment lid (p.12)
9 MICjack
il Instant stand (p 14)
i Trt|>od receptacle (p. 14)
Attach a tripod (not supplied) here.
When attaching a non-SONY tripod, make sure
that the length of the camera mounting screw is
shorter than 6.5 mm (9/32 inches). Otherwise,
the screw might damage the inner part of the
camcorder.
Attaching the shoulder strap
Attach the supplied shoulder strap to the hooks for the shoulder strap (above).
50 51