Chicago Electric 10" Ramdon Orbit Polisher/Waxer 43424 - Manual (Page 2)

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 2
PRODUCT SPECIFICATIONS
Item Description
Electrical Requirements 120 Volt / 60 Hz / Single Phase / .75 Amp
Pad Diameter 10”
Oscillations Per Minute 3,000
Orbital Design Direct Drive
Power Switch Type Toggle
Accessories Waxing Bonnet (1) / Polishing Bonnet (1)
Weight 4.70 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
E194601