Document Outline

• Precautions
  • CAUTION (Lithium battery)
• Before You Use the Commander
  • Understanding the 2 way remote system
• About This Manual
• Preparations
  • Compatible Components and Functions
    • Compatible Components
    • Functions
  • Preparing the Commander
    • Inserting batteries into the commander
      • 1 Remove the battery compartment cover.
      • Push in direction of
      • 4 Close the battery compartment cover.
      • 2 Insert the alkaline batteries.
      • Notes
      • Insert the lithium battery.
    • Setting up the commander
      • 1 Remove the touch pen.
      • 2 Turn CONTRAST to adjust brightness of the LCD.
      • Touch panel adjustment
        • 3 Adjust the position of the touch panel's LCD.
        • Touch the 4 dots with the touch pen.
        • Adjusted
        • Caution
      • Initial communication
        • 4 Press l/(l) on the receiver to turn on the receiver.
        • Point the commander's transmitter/receiver section toward the receiver's display, and touch OK.
        • If a communication error occurs during setup
    • when replacing the batteries
      • When to replace batteries
      • How to remove the lithium battery
  • Screen Hierarchy
• Location of Parts and Basic Operations
  • Hus chapter provides information about the locations and functions of the buttons and controls on this unit.
  • Front panel
    • m BACK LIGHT/COMMANDER OFF
    • [2] Touch panel
    • [3] VOL +/- buttons
    • [4] JOG DIAL control
    • H] SYSTEM/STANDBY button
    • [1] MUTING button
    • [3 CONTRAST control
    • [8] SLEEP button
  • Rear panel
    • [T] Transmitter/receiver section
    • [2 Battery cover
    • [3] Touch pen
    • g] SYSTEM/STANDBY button
    • in Touch pen holder
• Operation
  • This chapter explains how to operate the receiver and connected audio/ video components.
  • Basic Operations
    • Displaying the FUNCTION screen
      • Touch FUNCTION in the LCD.
      • 9 You can change the functions displayed in the FUNCTION screen
    • FUNCTION screen hierarchy
      • 1 Touch FUNCTION.
      • To operate other functions
      • Touch L^.
      • 3 Touch ^ to start playback.
      • 9 when the song number or song title is not displayed correctly
      • To view the LIST
      • ^ fExrrl
      • 1 Touch FUNCTION.
      • 2 Touch [¿1.
      • To operate other functions
      • Viewing the LIST
        • Other operations
        • 1 Touch FUNCTION.
        • 2 Touch ri"l.
        • Touch to select the player component (CD in this example).
        • 4 Touch to select the recorder component (MD/DAT in this example).
        • EDIT
        • 5 Touch • in RECORDER: MD/DAT, then touch ► in PLAYER: CD.
        • To stop recording at any time
        • To stop the recording procedure at any time
  • Performing Several Commands in Sequence Automatically (Macro Play)
    • 1 Touch FUNCTION.
    • Notes
    • Touch
    • si4in
  • Selecting Sound Fields
    • Displaying the SOUND FIELD screen
      • Touch SOUND FIELD.
      • SOUND FIELD
    • SOUND FIELD screen hierarchy
    • Selecting the sound field
      • 1 Touch SOUND FIELD.
      • 2 Use the JOG DIAL or touch A or T to scroll through the list.
      • 3 Push the JOG DIAL to select the highlighted sound field or touch the sound field you desire.
  • Adjusting Sound Fields
    • To adjust the frequency bands
      • 1 Touch EQ EDIT on the SOUND FIELD screen.
      • 2 Select the item that you wish to adjust (output speaker, sound range, frequency, or gain).
    • To adjust the surround parameters
      • 1 Touch SURR EDIT on the SOUND FIELD screen.
      • 2 Adjust as desired.
      • 3 Touch EXIT when adjustment is finished.
      • I to adjust to the desired
      • 4 Repeat steps 2 and 3 when there is more than one - item that you wish to adjust.
      • 5 Touch EXIT when adjustment is finished.
    • To adjust the speaker volume
      • 1 Touch LEVEL on the SOUND FIELD screen.
      • 2 Adjust as desired.
      • 3 Touch EXIT when adjustment is finished.
  • Adjusting the Commander's Operating Environment
    • Displaying the SETUP screen
      • Touch SETUP.
      • ISETUP
    • FUNCTION screen setup
      • 1 Touch SETUP.
      • 2 Touch FUNCTION HOOK UR
      • 2 Touch DOWNLOAD.
      • 3 Select the function not to be displayed and touch NO.
    • Downloading receiver data
      • 1 Touch SETUP.
      • Touch to select the data you wish to download and press:
      • 4 Repeat step 3 to download other data.
      • 5 Touch EXIT.
    • Other setup
      • ■ Adjusting the position of the touch panel (LCD)
      • ■ Setting the AUTO POWER function
      • ■ Changing the function of the SYSTEM/STANDBY button
      • ■ Setting the operation sound on or off
        • Touch ON (sound) or OFF (no sound) in BEEPtON OFF in the SETUP screen.
      • ■ Setting the warning aiarm on or off
        • Touch ON (sound) or OFF (no sound) in ALARM:ON OFF in the SETUP screen.
      • ■ Returning settings to their factory preset settings
        • 1 Touch ALL CLEAR on the SETUP screen.
        • 2 Touch OK.
  • Precautions during use
    • On installment
    • On the touch pen
    • On battery life
    • On handling
    • On cleaning
  • Troubleshooting
    • Operating system
    • Liquid crystal size
    • Liquid crystal type
    • Power requirements
    • Maximum external dimensions
    • (width X height x depth, including
    • projecting parts and controls)
    • A, B
    • C
    • D
    • E. F, G
    • H, I. J, K, L
    • M, N, O
    • P. Q, R
    • T, U, V. W, X, Y, Z