Editing with an editing controller, A o o obb – Sony GV-S50 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7
Press SYNCHRO EDIT on the other equipment to release the pause.
8 Press SYNCHRO EDIT on the other equipment to pause both units again.
9
Repeat steps 7 and 8 to edit other scenes.
10 After editing is completed, press the stop buttons (□ on this unit) on both units to stop
playback and recording.
About tt(LANC)
LANC stands for Local Application Control Bus System. The LANC terminal is used for controliing the tape
transport of video equipment and peripherals connected to it. This terminal has the same function as
those indicated as CONTROL L or REMOTE.
Editing with an Editing Controller
By adding an editing controlier to the video equipment connected through the LANC terminais, the
various piece of equipment can be operated with the controller.
AudioArideo cord VMC-910S/920S
To VIDEO
OUT
Edinting controller
To e REMOTE
To AUDIO
OUT
o
•)PO
^ .j j .je
a o o OBB
To CONTROL L
(LANC)
Connecting Cord
è^To
T
CONTROLL
(LANC)
To VIDEO,
(yellow)
Connecting Cord
To REMOTE