Editing onto another tape, Before editing, Starting editing – Sony CCD-TR83 User Manual
Page 30: To edit more scenes, To stop editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto Another Tape
You can create your own video program by editing with any other
El
8 mm,
HI 01
Hi8, SiS VHS,
SSHS
S-VHS, PCBSra VHSC,
sns
S-VHSC,
id
Betamax or E3S1 ED Betamax VCR that has
audio/video inputs.
Before Editing
Connect the camcorder to the VCR using the supplied A/V connecting cable (p. 15).
Set the input selector on the VCR to LINE, if available.
(
1
)
While pressing the small green button on the POWER switch, turn it to PLAYER.
(2) Set EDIT to ON in the menu system.
MENU
OFF
ION i
[MENU] : END
: Signal flow
Starting Editing
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert your recorded tape
into the camcorder.
(2) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing, then set the camcorder in playback pause mode.
(3)
On the VCR, locate the recording start point and set the VCR in the recording pause mode.
(4)
Press II on the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
' Repeat steps 2 to 4.
To Stop Editing
Press □ on both the camcorder and the VCR.
Use of tKe EDITSEARCH button
You can play back the tape in normal/reverse direction by holding down EDITSEARCH during
playback pause mode. You can also play back still pictures successively at specific intervals by pressing
EDITSEARCH intermittently.
Note on the DISPLAY function
If you have displayed the viewfinder screen indicators on the-TV, erase the indicators by pressing
30
DISPLAY on the Remote Commander so that they will not be superimposed on the edited tape.