Cobra Electronics microTalk Professional 2-Way Radio - Manual (Page 6)

11
Operation Operation
Talk
Confirmation
Tone
Standby Mode Standby Mode
When finished talking, Release PTT Button to
receive incoming transmissions.
Your microTalk Professional is always in the stand-
by mode when the
PTT Button is not pressed
and you are not in function mode. See Advanced
Features section on page 16.
Note
While PTT Button is depressed
you cannot receive incoming
calls.
Note
When you release the PT T
Button,the person you are
talking to will hear a tone indi-
cating that it’s ok to talk. See
Talk Confirmation Tone section
on page 11.
Press and hold PTT Button.
Th e ( ) i con will appe a r.
Release PTT Button and listen
for response.
Hold mic about 2 inches from mouth.
Speak in a normal voice.
Talking to
Another
Party
PRESS AND
HOLD
RELEASE FOR
RESPONSE
10
Talk Confirmation Tone
Your listener will hear an audible
tone when you release
the
PTT Button.
This alerts the other party t h at
you are finished talking and it’s
OK for them to begin talki n g.
Cobra PR 2000 manual M(4217)A 12/4/00 4:18 PM Page 10