Hookup 2: vcr setup – Sony SLV-690HF User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Hookup 2:
VCR setup
1
Set the RF UNIT switch to '
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set ]
the switch to either
■
channel.
For details, see page 49. If you made A/V connections (page 8), you can
skip this step.
2
Turn on your cable box.
3
Change the on-screen display language if desired. For details, see
page 22.
O
Press MENU and select LANGUAGE.
0
Select the language, and press EXECUTE.
► ENGLISH
FRANÇAIS
ESPAÑOL
Press MENU and select TUNER PRESET. Set
ANTENNA/CABLE to ANT. For details, see
page 23.
TUNER PRESET
CH2
►ANTENNA/CABLE «ANT
CABLE
AUTO PRESET
MANUAL SET «ADD
ERASE
AFT *ON
OFF
FINE TUNING
5
Preset the channels into the VCR. Select
AUTO PRESET and press EXECUTE.
TUNER PRESET
CH2
ANTENNA/CABLE•ANT CABLE
► AUTO PRESET
MANUAL SET
»ADD ERASE
AFT
«ON OFF
FINE TUNING
' PLEASE WAIT •
Getting Started | 13