Location and, Location and function of controls – Sony CCD-V1 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
n
LOCATION AND
FUNCTION OF CONTROLS
For details, refer to the pages indicated next to each item.
Optical viewfinder
The Indicators Inside the viewfinder light or
Wink during camera recording.
The eyecup In the photo Is attached for the
right eye.
For the left eye, detach the rubber eyecup
arki attach It as illustrated below.
For glasses, fold the eyecup as Illustrated
below.
Shoulder strap loop
DATA DISPLAY SYSTEM
(DDS) ® ©
MIC
(microphone)
jack
and
MIC DC OUT jack
Connect an optional microphone.
STANDBY button
Press this button to enter the
recording pause mode.
Press again to turn off the power.
CRIP RELEASE button O
REMOTE connector (5-pin)
O
Connect the wired Remote
Commander RM-87 (supplied).
The optional RM-E100V editing
TOntroller can be also connected here
Shoulder strap loop
AUDIOAfIDEO OUT jacks
(phono type)®
Connect to
an
RFU-88UC RFU
adaptor or an audlo/video Input of
TV/monItor
Of a VCa
RFU DC OUT
Connect to an RFU-88UC RFU
adaptor.
AV (audio/video) input jacks
(miniphono type) ®
Connect to audloAfideo outputs of a TV or
another VCR with the supplied connecting cable.
rip strap O
Adjust this strap so that your
fingertips can easily manipulate the
REC START/STOP button.
ROWER ON/OFF switch
The unit cannot be operated when
the switch is set to OFF (the shutter
Is closed) except for the DDS (DATA
DISPLAY SYSTEM).
REC
(recording)
START/STOP
button ©
Eyecup adjustment