Notes – Sony KP-41T35 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting two VCRs for tape editing using MONITOR OUT
You can record input images displayed on the screen.
This type of connection should be used only when you
connect from the line input of one"VCR, and from the
line output of a second VCR.
(Rear of projection TV)
VMC-810S/820S
(not supplied)
VMC-810S/820S
(not supplied)
Notes
• Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
• You can use the S video jack to connect a VCR for playback
and the composite video connector to connect a VCR for
recording.
• For model KP-41T35, you can connect the audio and video
outputs of the VCR to VIDEO 3 IN jacks instead of the VIDEO
2 IN jacks.
When connecting a single VCR to the projection TV, do not
connect the MONITOR OUT to the VCR's line input, while at
the same time connecting from the projection TV's VIDEO IN
connectors to the VCR's line output, as shown below.
(Rear of projection TV)
VIDEO IN
1MONITOR
JouT
VCR 1
N
i.
►
l
I
net
IN OUT
-© q)
DO NOT CONNECT IN THIS WAY.
Getting Started
-| -| -EN