To stop recording momentarily [a, To finish recording [b, Camera recording – Sony CCD-TR98 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Recording
Makt;' sure that a power source and a cassette is inserted.
When vou use the camcorder for the first time, power on it and reset the date and time to vour time
(p. 33) before vou start recording. When you reset the date and timi', the d<ite is automatically
recorded for 10 seconds after you start recording (AUTO DATF, feature). I his feature works only
once a day.
Behire yoti record one-time events, you may want to make a trial recording to make sure that you
are using the camcorder correctly.
(
1
)
While pressing the small green button on the POWER switch, slide it to CAMER.A.
(2)
Slide the START/STOP MODE switch to A .
(3)
Turn ST ANDBY up. The "STBY" indicator appears in the viewfinder.
(4)
Press S3 ART/STOP (red button). The camcorder starts recording and the "STBY" indicator
changes to the "REC" indicator.
You can also select Recording mode, SP (standard play) mode or LI’ (long play) mode. Set REC
MODE (p. 29) according to the length of your planned recording before you start.
To Stop Recording Momentarily [a]
Press START /STOP again. The "REC" indicator in the viewfinder changes to the "STBY" indicator
(Standby mode).
To Finish Recording [b]
Press ST.‘\RT/STOP. Turn STANDBY down, and set the POWER switch to OFF.
Then, eject the cassette (p. 9) and remove the battery pack (p. 8).
10