Notes – Sony SLV-SE220G User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Example C
TV
Your VCR (Recorder)
LINE-3*i or LINE-
2*2
^: Signal flow
How to connect to a stereo system (SLV-SE820G only)
Connect the t LINE-2 L o Rjacks on this VCR to the audio outputjacks
on the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-
2106HG cable instead and connect the cable to the line outjacks ofthe other VCR.
• When you connect another VCR to the LINE-3*
1
or LINE-2*
2
connector, press
INPUT SELECT to display “L3”*
1
or “L2”*
2
in the display window.
*
1
SLV-SE820G only
*
2
SLV-SE720G/I and SE220G/I only
00 Connecting to a VCR or stereo system