Attaching the external antenna connector, Attaching a uhf/vhf band mixer, Eac-66 – Sony SLV-N77 User Manual
Page 61: Uhf/vhf
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching the external antenna connector
When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use the EAC-32 antenna
connector (not supplied) to connect the
antenna to the VCR.
1
2
2 Retightenthe
300-ohm twin
lead cable
EAC-32 antenna
connector (not
supplied)
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
screws.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use the EAC-66 UHF/VHF band
separator/mixer (not supplied) to connect the
antenna to the VCR.
300-ohm twin,
lead cable
EAC-66
UHF/VHF
band
separator/
mixer (not
supplied)
75-ohm coaxial ■
cable
^ Loosen the screws on the mixer.
2 Wind the twin leads around the screws on the mixer.
2 Retighten the screws.
A
Connect the 75-ohm coaxial cable to the mixer.
>
a
a
5'
3
w
5"
o
3
&>
o'
3
General setup information 61