Canon PowerShot A495 - Manual (Page 87)

87
Checking the Focus
You can magnify the area of a recorded image that was inside the AF
Frame, or the area of a face that was detected, to check the focus.
1
Choose [Focus Check].
● Press the n button, choose the 1 tab
and [Info Display].
● Press the qr buttons to choose [Focus
Check], then press the n button.
 A white frame will appear where the AF
frame or face was when the focus was set.
 A gray frame will appear on a face detected
during playback.
 The area within the orange frame appears
magnified.
2
Switch frames.
● Pressing the m button will switch to a
different frame.
3
Change the magnification level or
location.
● Press the zoom button toward k.
● Press the zoom button to change the
magnification level, and press the
opqr
buttons to change the display position while
checking the focus.
● Pressing the n button resets the
display to Step 1.