Editing with a vcr without a sony control terminal – Sony SLV-373UC User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing with a VCR without a Sony Control Terminal
Using this VCR N the Recording VCR and an 8 mm VMee Camera Raeonler as
the Playback VCR
Insert a cassette for recording into the recording
VCR.
O Turn on the power of the playback VCR and insert
^ a source cassette.
O Activate the EDIT mode on the recording VCR.
Activate the EDIT mode on the playback VCR if the
player has this function.
A Searbh for the playback start point and enter the
“ playback pause mode.
C Search for the recording start point and enter the
recording pause mode.
Press the PAUSE button on both of the units.
Recording of the signals from the playback VCR will
start.
When editing Is completed
Press the STOP button on both of the VCRs.
When pressing PAUSE
Press the PAUSE button on the playback VCR a little before
pressing the one on the recording VCR.
When the playback VCR Is a stereo unit
Make connections with the VMC-910MS/920MS cable {not
supplied).
When connecting the VCRs
Do not connect both LINE IN and LINE OUT jacks on the
two VCRs simultaneously. Doing so may cause a humming
noise.
54