Resetting the date and time, To correct the date and time setting, To check the date and time – Sony CCD-TR714 User Manual
Page 33: The year indicator changes as follows, Note on the time indicator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the Date and Time
Reset the date and time using the DATE(+) and TIME(NEXT) buttons.
(1) Slide the POWER switch to CAMERA.
(2) Turn STANDBY up.
(3) Press DATE(+) and TIME(NEXT) simultaneously until the year indicator flashes in the
v'iewfinder.
(4) Set year, month, day, time, minute by pressing DATE(+) and TIME(NEXT). Note that when you
keep DATE(+) pressed, the digits advance faster.
3 i
n> 3
n
0;
3
r«
O
To Correct the Date and Time Setting -
Repeat steps 3 and 4.
To Check the Date and Time
Press DATE to display the date indicator in the v iewfinder. Press TIME to display the time indicator.
When you press the same button again, the indicator goes out.
The year indicator changes as follows:
’96------
^ ' 9 7 -
...>’25
Note on the time indicator
The internal clock of the camcorder operates on a 12-hour cycle.
12:00:00 AM stands for midnight.
12:00:00 PM stands for noon.
33