Attaching the external antenna connector, Attaching a uhf/vhf band mixer – Sony SLV-N88 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching the external antenna connector
When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use the EAC-32 antenna
connector (not supplied) to connect the
antenna to the VCR.
1
2
2 Retightenthe
300-ohm twin
lead cable
EAC-32 antenna
connector (not
supplied)
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
screws.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use the EAC-66 UHF/VHF band
separator/mixer (not supplied) to connect the
antenna to the VCR.
300-ohm twin,
lead cable
EAC-66
UHF/VHF
band
separator/
mixer (not
supplied)
75-ohm coaxial ■
cable
^ Loosen the screws on the mixer.
2 Wind the twin leads around the screws on the mixer.
2 Retighten the screws.
A
Connect the 75-ohm coaxial cable to the mixer.
>
a
a
5'
3
w
5"
o
3
&>
o'
3
General setup information 61