Sony SLV-779HF - Manual (Page 37)

Press ♦ /♦ to highlight AUTO, then press
OK.
AUTO CLOCK SET
m m c , -
TIME ZONE
DAYLIGHT SAVING
SELECT :|
SET
:
QUIT :!
Press ♦ /♦ to highlight FULL AUTO, then
press OK. AUTO CLOCK SET
TIME ZONE
DAYLIGHT SAVING
IDRETURN
SELECT:
SET
:
QUIT ;|
To activate the Auto Clock Set function, turn off the VCR.
The VCR automatically sets the clock by searching for a channel that
carries a time signal and sets your time zone and Daylight Saving
Time (if applicable).
If your clock is set to the wrong time zone or Daylight Saving Time,
you can adjust these settings without turning off fhe Auto Clock Set
feature (page 38).
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The clock cannot be set automatically if you don't receive a channel that carries a
time signal in your area. If so, set the clock manually.
• If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 30 minutes. If nothing happens even after you
wait about 30 minutes, set the clock manually.
• If you use Hookup 1, make sure you leave the cable box on.
continued
Getting Started 3 7