Note – Sony MRD-D1 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9
Connect the IR emitters to the modulator unit. With firm pressure,
place one of the adhesive backed IR emitters over the remote
sensor on the DSS receiver. Repeat the procedure for the second
video source.
DSS Receiver
Note
• You may have to refer to the owners manual of the second video
source to determine the location of its remote sensor.
Your modulator unit is now ready for use and can be turned on,
tuned and tested without connecting the remote TVs. If you wish
to turn on now, proceed to the section of this manual dealing with
set-up and tuning the modulator unit on page 11. If you wish to
connect the remote TVs now, proceed to page 10.
Installation Instructions