Canon i 900D - Manual (Page 4)

3
(9) (9) (9) (9) Buttons Buttons Buttons Buttons
Press to scroll through the options or to scroll the screen.
(10) (10) (10) (10) Photo Viewer Button Photo Viewer Button Photo Viewer Button Photo Viewer Button
Press to start/exit the Photo Viewer. This button is also used to save the data stored in the
memory card on the hard disk of the computer.
For more details about Photo Viewer, see “Using Photo Viewer” on page 29.
(11) (11) (11) (11) Print Button Print Button Print Button Print Button
Press to start printing according to the settings displayed on the LCD.
(12) (12) (12) (12) Cancel Button Cancel Button Cancel Button Cancel Button
Press to cancel the settings you have made. If this button is pressed during printing, the
printer aborts printing.
(13) (13) (13) (13) Buttons Buttons Buttons Buttons
Press to enlarge or reduce the image being displayed. Pressing this button in trimming mode
allows you to enlarge/reduce the area to be trimmed. See “Trimming and Rotating the
Sections you wish to Print.” on page 17.
(14) (14) (14) (14) Indicator Lamp Indicator Lamp Indicator Lamp Indicator Lamp
The indicator lamp is lit when memory card reading is enabled and flashes while the memory
card is being read.
Important Removing the memory card or turning off the printer while the Indicator Lamp is
flashing can damage the data stored in the memory card.
Note To zoom in to an image
Follow the procedure below to zoom in to the image displayed on the LCD.
(14)
Scroll the image with buttons