Camera recording, Note on beep sound, To stop recording momentarily [a – Sony CCD-TR82 User Manual
Page 11: To finish recording [b
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Recording
Make sure that a power source and a cassette is iirserted. The date is automatically recorded for 10
seconds after you start recording (AUTO DATE feature). This feature works only once a day. You can
hear the beep sound to confirm your operation. Before you record one-time events, you may want to
make a trial recording to make sure that you are using the camcorder correctly.
(1)
While pressing the small green button on the POWER switch, slide it to CAMERA.
(2)
Turn
STANDBY up.
(3)
Press START/STOP. The camcorder starts recording and the "REC" indicator
apperars in the viewfinder.
STBY
0:00:00
AUTO DATE
§■
Ob
REC
0:00:01
<
a
1
JUL.4 1994
1
Note on beep sound
As indicated with J* in the illustrations, a beep sounds when you turn the power on or when you start
recording and two beeps sound when you stop recording, confirming the operation. Several beeps also
sound as a warning of any unusual condition of the camcorder (p.51). Note that the beep sound is not
recorded on the tape. If you do not want to hear the beep sound, select "OFF" in the menu system (p.25).
To Stop Recording Momentarily [a]
Press START/STOP again. The "STBY" indicator appears in the viewfinder
(Standby mode).
To Finish Recording [b]
Press START/STOP. Turn STANDBY down, and set the POWER switch to OFF.
Then, eject the cassette (p.9).
3
c
I
I
I'
[a]
№1
See the next page for further information.
11