Casio CTK900 - Manual (Page 53)

Song Memory Function
E-50
Use the SONG MEMORY TRACK buttons marked CHORD/
TR1 through TR6 to select the track you want.
J SONG MEMORY TRACK Buttons
1
Track 1
2
Track 2
3 Track 3
4
Track 4
5
Track 5
6 Track 6
The status of the Song Memory changes each time you press
the SONG MEMORY button.
With real-time recording, the notes you play on the keyboard
are recorded as you play them.
1.
Press the SONG MEMORY button twice to enter
real-time record standby.
• Perform step 2, below, within five seconds after
entering record standby.
• The level meters for tracks 11 through 16 are shown on
the display while the keyboard is in record standby, so
you can easily check which tracks are already
recorded. See “Level Meter Contents During Record/
Edit Standby” on page E-57 for details.
2.
Use the number buttons to select a song number
(0 to 4).
1 Song number
• The above song number screen remains on the display
for about five seconds. If it disappears before you have
a chance to select a song number, use the [
]
CURSOR button to re-display it.
3.
Make the following settings.
• Tone number
• Rhythm number
• Tempo
• MODE button
4.
Press the START/STOP button to start recording.
• Real-time recording without a rhythm starts. If you want
to record with a rhythm, press the INTRO/ENDING 1/2
or VARIATION/FILL-IN 1/2.
• When recording starts, the REC indicator flashes on
the display. After a few moments the indicator stops
flashing, and remains on the display.
Selecting a Track
Basic Song Memory operations
1 2 4 6 3 5
Using Real-time Recording
To record with real-time recording
R o d r c e
1
707A-E-052A