Craftsman 358.792441 - Manual (Page 10)

KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize
yourself with the location of various controls and adjustments. Save this manual for
future reference.
BLADE
The BLADE is designed for cutting
grass, weeds, and brush up to 1/2 inch
in diameter.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line
and is designed for cutting grass and
light weeds-
BLADE SHIELD
The BLADE SHIELD provides protection
from the spinning blade.
TRIMMER SHIELD
The TRIMMER SHIELD provides protec­
tion from the spinning trimmer head.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach­
ments to be installed. The optional at­
tachments are:
Edger............................... 358.792401
Cultivator.......................... 358.792410
Blower.............................. 358.792421
WARNING: Always disconnect
powerhead spark plug before remov­
ing or installing attachments.
REMOVING BRUSHCUTTER AT­
TACHMENT {OR OTHER OPTIONAL
ATTACHMENTS)
CAUTION: When removing or instal­
ling attachments, place the powerhead
and attachment on a flat surface for
stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Upper Tube
Coupler
Lower
Attachment
TIGHTEN ’' Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
/ Coupler]
Lower Attachment
3.
\
Upper Tube
While securely holding the upper
tube, pull the attachment straight
out of the coupler.
10