Craftsman 917.270840 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO SET UP YOUR TRACTOR
CHECK BATTERY
• Lift hood to raised position.
• if this battery is put into service after
month and year indicated on label (label
located between terminals) charge bat
tery for minimum of one hour at 6-10
amps. (See "BATTERY" in MAINTE
NANCE section of this manual for
charging instructions).
Label
INSTALL SEAT
Adjust seat before tightening adjustment
knob.
• Remove cardboard packing on seat pat
• Place seat on seat pan and assemble
shoulder bolt Tighten shoulder bolt
securely.
• Assemble adjustment knob and flat
washer loosely. Do not tighten.
• Lower seat into operating position and
sit on seat.
• Slide seat until a comfortable position i£
reached which allows you to press
ciutch/brake pedal all the way down.
• Get off seat without moving its adjuster
position.
• Raise seat and tighten adjustment knot
securely.
Seat