Maintenance, Batteries, Battery pack removal and preparation for recycling – Craftsman 315.271190 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MAINTENANCE

^ WARNING:

When servicing, use only identical

Craftsman replacement parts. Use of any other part
may create a hazard or cause product damage.

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use.

Use clean cloths to remove dirt, dust, oil, grease, etc.

^ WARNING:

Do not at any time let brake fluids,

gasoline, petroleum-based products, penetrating oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy

plastic.

Do not

abuse power tools. Abusive practices can damage

tool as well as workpiece.

Only the parts shown on parts list, page 23, are intended
to be repaired or replaced by the customer. All other parts

should be replaced at a Sears Service Center.

^ WARNING:

Do not attempt to modify this tool or

create accessories not recommended for use with
this tool. Any such alteration or modification is

misuse and could result in a hazardous condition
leading to possible serious personal injury.

BATTERIES

Your saw's battery pack is equipped with 15 nickel­
cadmium rechargeable batteries. Length of service from

each charging will depend on the type of work you are

doing.

The batteries in this tool have been designed to provide

maximum trouble free life. However, like all batteries, they
will eventually wear out.

Do not

disassemble battery pack

and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry,
could result in a serious burn.

To obtain the longest possible battery life, we suggest the
following:

Store and charge your batteries in a cool area.

Temperatures above normal room temperature will

shorten battery life.

Never store batteries in a discharged condition.

Recharge them immediately after they are

discharged.

All batteries gradually lose their charge. The higher

the temperature the quicker they lose their charge, if
you store your tool for long periods of time without

using it, recharge the batteries every month or two.

This practice will prolong battery life.

To preserve natural resources, please
recycle or dispose of batteries properly.

This product contains nickel-cadmium

battery. Local, state, or federal laws
may prohibit disposal of nickel-cadmium

batteries in ordinary trash.

Consult your local waste authority for information

regarding available recycling and/or disposal options.

BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING

^ WARNING:

Upon removal, cover the battery pack's

terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or

remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.

Also, never touch both terminals with metal objects

and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.

20

Advertising