Operatio, Lock bumper into up position: (see figure 6) – Craftsman 486.24628 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 4:
(SEE FIGURE 4)
• Assemble a shoulder bolt, large washer and 3/8" lock
nut to the frame brace and slotted hole on each side
of the bumper.
STEP 5:
(SEE FIGURE 5)
• Fasten the frame braces to the tractor frame using
four 3/8-16 X 1" carriage bolts and 3/8" whiziock nuts.
NOTE: Only tractor frame shown for clarity.
OPERATIO
J
TILT BUMPER DOWN BEFORE RAISING
TRACTOR HOOD:
(SEE FIGURE 6)
•
While pushing In lightly on top of bumper, pull latch
under front of bumper.
•
Keep latch pulled out and pull down on bumper.
LOCK BUMPER INTO UP POSITION:
(SEE
FIGURE 6)
•
• Push bumper up Into position. Latch will lock bumper
Into place.
FIGURES
Call 1 -866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE