Craftsman 917.27103 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

■» Jf grass is extremely tall, it should be

mowed twice to reduce toad and possi­
ble fire hazard from dried clippings.
Make first cut relatively high; the second

to the desired height.

Do not mow grass when it is wet. Wet
grass win plug mower and leave unde­
sirable clumps. Allow grass to dry
before mowing.

o Always operate engine at full throttle

when mowing to assure better mowing
performance and proper discharge of
material. Regulate ground speed by se­
lecting a low enough gear to give the
mower the best cutting performance as
well as the quality of cut desired,

o When operating attachments, select a

ground speed that will suit the terrain
and give best performance of the at­
tachment being used.

MULCHING MOWING TIPS

IMPORTANT: For best performance, keep
mower housing free of buiit-up grass and

trash- Clean after each use.
® The special mulching blade will recut

the grass clippings many times and

reduce them in size so that as they fail

onto the lawn they will disperse into the
grass and not be noticed. Also, the

mulched grass will biodegrade quickly

to provide nutrients for the lawn. Always

mulch with your highest engine (blade)

speed as this will provide the best recut­
ting action of the blades,

® Avoid cutting your lawn when it is wet.

Wet grass tends to form dumps and

interferes with the mulching action. The

best time to mow your lawn is the early

afternoon. At this time the grass has
dried and the newly cut area will not be

exposed to the direct sun.

For best results, adjust the mower cut­

ting height so that the mower cuts off

only the top one-third of the grass
blades. For extremely heavy mulching,

reduce your width of cut on each pass
and mow siowly.

Max 1/3

Certain types of grass and grass condi­
tions may require that an area be
mulched a second time to completely
hide the clippings. When doing a sec­
ond cut, mow across or perpendicular to
the first cut path.
Change your cutting pattern from week
to week. Mow north to south one week
then change to east to west the next
week. This will help prevent matting and
graining of the lawn.

17

Advertising