Maintenance agreement, Customer responsibilities, Product specifications – Craftsman 580.747100 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONGRATULATIONS on your purchase of a Sears Crafts­
man high pressure washer. It has been designed, engi­
neered and manufactured to give you the best possible
dependability and performance.

Should you experience any problem you cannot easily
remedy, please contact your nearest Sears Service Cen-

ter/Department We have competent, well-trained techni­
cians and the proper tools to service or repair this unit.

Please read and retain this manual, The instructions will

enable you to assemble and maintain your high pressure
washer properly, Always observe the “SAFETY RULES.“

MODEL
NUMBER

SERIAL
NUMBER

580.741700

DATE OF
PURCHASE

THE MODEL AND SERIAL NUMBERS WILL BE

FOUND ON A DECAL ATTACHED TO THE PRES­
SURE WASHER-

YOU SHOULD RECORD BOTH SERIAL NUMBER

AND DATE OF PURCHASE AND KEEP IN A SAFE

PLACE FOR FUTURE REFERENCE,

MAINTENANCE AGREEMENT

A Sears Maintenance Agreement is available on this prod­

uct. Contact your nearest Sears store for details,

CUSTOMER RESPONSIBILITIES

' Read and observe the safety ruies.

« Follow regular schedule in maintaining, caring for and

using your high pressure washer.

» Follow the instructions under “Customer Responsibiii-

ties" and "Storage" sections of this Owner's Manual.

PRODUCT SPECIFICATIONS

Pressure Washer Specifications

OUTLET PRESSURE

1400 psi

FLOW RATE

2 gpm

DETERGENT MIX

Use undiluted detergent

WATER SUPPLY

TEMPERATURE

Not to exceed 140°F

SUCTION HEiGHT

3 FT. maximum

Engine Specifications

RATED HORSEPOWER

3HP

DiSPL^CEMENT

9.06 cu, inches (148cc)

SPARKPLUG: Type:

Champion J-8C
or equivalent

Set Gap To.

0.030 inch (0.76mm)

GASOLINE CAPACITY

1 U.S. quart

OIL (20 02. capacity)

SAE 30 weight

SOLID STATE IGNITION

AIR GAP

0 ,0125 inch

In the State of California a spark arrestor is required by law

(Section 4442 of the California Public Resources Code).

Other states may have similar laws, Federal laws apply on
federal lands

NOTE: if you equip the engine of yourpressure washer with

a spark arrestor muffler, the spark arrestor must be main­
tained in effective working order by the owner/operator

You can order a spark arrestor through your Sears Service
Center. See Pages 16 and 17 for details.

ONE YEAR LIMITED WARRANTY ON CRAFTSMAN HIGH PRESSURE WASHER

For one year from the date of purchase, when this Craftsman High Pressure Washer is maintained and operated

according to the instructions in the owner's manual, Sears will repair, free of charge, any defect in material and
workmanship.
If the Craftsman High Pressure Washer is used for commercial purposes, this warranty applies for only 90 days

from the date of purchase, if the high pressure washer is used for rental purposes, this warranty applies for only
30 days after date of purchase.
This warranty does not cover:
» Expendabie items
“ Repairs necessary because of operator abuse or negligence, including both crankshaft and the failiure to

maintain the equipment according to the instructions contained in the owner's manual,

WARRANTY SERVICE IS AVAILABLE BY RETURNiNQ THE HIGH PRESSURE WASHER TO THE NEAREST

SEARS SERVICE CENTER/DEPARTMENT THROUGHOUT THE UNITED STATES.

This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

SEARS, ROEBUCK AND CO., D/817 WA, Hoffman Estates, IL 60179

Advertising