Engine speed, To convert mower – Craftsman 917.388201 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SAFETY GLASSES

FORESIGHT IS BEnER

THAN NO SIGHT

The

operation of any

lawn mower can result
in foreign objects thrown
into the eyes, which can
result in severe eye dam­

age. Always wear safety glasses or eye
shields while operating your lawn mower
or performing any adjustments or repairs.
We recommend a standard safety glasses
or wide vision safety mask worn over
spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for

optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

A

cauti

ON:

Federal regulations require

an engine control to be installed on this
lawn mower in order to minimize the
risk of blade contact injury. Do not under
any circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
• Your lawn mower is equipped with an

operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels

for high cut, adjust cutting height to suit
your requirements. Medium position is

best for most lawns.
• To change cutting height, squeeze ad­

juster lever toward wheel. Move wheel

up or down to suit your requirements. Be
sure all wheels are in the same setting.

NOTE:

Adjuster is properly positioned when

plate tab inserts into hole in lever. Also, 9-
position adjusters

(if so equipped) allow

lever

tt^^¿^^tabs.

To convert to mulching or discharging
operation, remove grass catcher and
close rear door.

LEVER FORWARD TO RAISE MOWER Lever

TO CONVERT MOWER

Your lawn mower was shipped ready to be

used as a mulcher. To convert to bagging
or discharging:

REAR BAGGING
• Lift rear door of the lawn mower and

place the grass catcher frame hooks
onto the door pivot pins.

SIDE DISCHARGING
• Rear door must be closed.
• Open mulcher door and install dis­

charge deflector under door as shown.

• Mower is now ready for discharging

operation.

• To convert to mulching or bagging opera­

tion, discharge deflector must be removed
and mulcher door must be closed.

SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR LAWN MOWER

FOR MULCHING -
1. Rear door closed.

2. Mulcher door closed.

FOR REAR BAGGING -
1. Grass catcher installed.

2. Mulcher door closed.

FOR SIDE DISCHARGING -
1. Rear door closed.

2. Discharge deflector installed.

ACAUTION:

D

o

not run your lawn mower

without rear door closed, clipping deflector

or approved grass catcher in place. Never
attempt to operate the lawn mower with the
rear door removed or propped open.

8

Open mulcher door

Install

discharge-
deflector

Advertising