Operation, Spray gun assembly (contains gun and wand) – Craftsman 919.769020 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Know Your High Pressure Washer
' Read this Owner’s Manual and Safety Rules before
operation of your High Pressure M/as/jer Compare
this illustration with our pressure washer to familiarize
yourself with the iocation of various controls and
adjustments. Save this manual for future reference.
PUMP- Develops high pressure.
ENGINE OIL FILL- Place where engine oil is poured.
PRESSURE REGULATOR- Allows you to adjust the
pressure of the outlet stream.
ENGINE RUN/STOP SWITCH- Sets engine in starting
mode for recoil starter — Stops running engine.
RECOIL STARTER- Used for starting the engine
manually.
SPRAY GUN ASSEMBLY (Contains Gun and Wand)-
Controls the application of water onto cleaning surface
with trigger device.
PUMP OIL FILL- Port where pump oil is poured and
breather cap is located.
GAS TANK/CAP- Cap is removed and unleaded
gasoline is poured.
CHEMICAL INJECTION TUBE AND FILTER- Mixes
water and detergent in outlet water flow.
HIGH PRESSURE OUTLET- Connection for high pres
sure hose.
CHOKE- Lever used for starting unit.
QUICK CONNECT NOZZLES- Tips used for various
degrees of spray patterns.