CNet Technology CNIG904S - Manual (Page 18)

CNet Technology Inc Configuration
15
WAN - PPPoE
If you selected PPPoE on the WAN screen, the display will be like the following example.
Figure 8: WAN Port - PPPoE
Data – WAN (PPPoE)
Account
Account/User Name The name of the Internet account provided by your ISP.
Password
& Verify Enter the password for the above account. Re-enter the password in
the Verify field, to ensure it is correct.
IP Address
IP Address
provided by ISP
Normally, this is Dynamic; use this setting if your ISP did not
provide an IP Address. If your ISP did provide an IP Address,
select Fixed and enter the value they provided.
Options
Idle Time-out If an connection is inactive for longer than this time period, it will
be terminated. If zero (0), then the connection will never be termi-
nated.
Connect on Demand Normally, this should be Enabled. If disabled, you must use the
Connect button on the Status screen to establish a connection.
Buttons
Save Save any data you have entered on this screen. Remember to save
before changing to another screen.
Cancel Cancel any data you have entered since the last "Save" operation.