Awarnino, Awarnirg, Caution – Craftsman 875.199810 User Manual

Page 4: Warning, Awarning, Warnirg

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Owner's Manual

Model No. 875.199810

Disconnect the air tool from air supply

before changing tools or attachments,

servicing and during non-operation.

Do not wear loose fitting clothing,

scarves,

or

neck ties in work area. Loose

clothing may become caught in moving

parts and result in serious personal injury.

Do not wear Jewetry when operating

any tool. Jeweiry may become caught in

movirtg parts and result in serious

personal injury.

Do not depress trigger when connecting

the air supply hose.

Never trigger the tool when not applied

to a work object.

Attachments must be securely

attached. Loose attachments can cause

serious injury.

Protect air lines from damage or

puncture.

Never point an air tool at oneself or any

other person. Serious injury could occur.

Check air hoses for weak or worn

conditions before each use. Make sure all

connections are secure.

A

warnino

A

caution

Release all pressure from the system

before attempting to install, service,

relocate or perform any maintenance.

Keep all nuts, boHs and screws tight

and ensure equipment is in safe working

condition.

Use attachments designed for use with

air powered tool. Always examine

accessories before mounting for chips,

cracks. Or signs of damage.

Never use mounted points or other

accessories that have been drop^ied or

exposed to water, solvent or extreme

temperature changes. It is a good practice

to operate the tool in a protected

enclosure fw one minute alter mounting

any accessory.

AWARNiNG

Always use accessories with an RPM

rating that meets or exceeds the tool

RPM fating.

A

warning

Never carry a tool by the hose

or

pull

the hose to move the tool or a

compressor. Keep hoses away from

heat, oil and sharp edges. Replace any

hose that is damaged, weak or worn.

A

warnirg

Inhalation hazard: Abrasive tools, such

as grinders, sanders and

cut-off foo/s

generate dust

and abrasive materials

which can be harmful to human lungs

and respiratory system. Always wear

MSHA/NIOSH approved, properly fitting

face mask or respirator when using

such

loots.

ENG-4

Advertising