Need more help, R an – Craftsman 28928 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM
CAUSE
CORRECTION
Battery
will not
1
Bad battery cell(s).
1
Replace battery.
charge
2
Poor cable connections.
2
Check/clean all connections.
3
Faulty regulator (if so equipped).
3
Replace regulator.
4
Faulty alternator.
4
Replace alternator.
Loss of drive
1
Freewheel control in “disengaged”
position.
1
Place freewheel control in
“engaged” position.
2
Motion drive belt worn, damaged,
or broken.
2
Replace motion drive belt.
3
Air trapped in transmission
during shipment or servicing.
3
Purge transmission.
Engine “backfires”
when turning
engine “OFF”
1
Engine
throttle
control
not
set
between half and full speed (fast)
position before stopping engine.
1
Move throttle control between
half and full speed (fast) position
before stopping engine.
Engine dies when
tractor is shifted
into reverse
1
Reverse operation system (ROS)
is not “ON” while mower or other
attachment is engaged.
1
Turn ignition key to ROS “ON”
position. See Operation section.
NEED MORE HELP?
th
?r an
Il¥ll
Find this and all your other product manuals online.
Get answers from our team of home experts.
Get a personalized maintenance plan for your home.
Find information and tools to help with home projects.
brought to you by Sears
31