Craftsman 486.245993 - Manual (Page 2)

WARRANTY ASSEMBLY
ONE YEAR LIMITED WARRANTY
When operated and maintained according to the instructions
supplied with it, if this Tractor Brush Guard fails due to a defect
in material or workmanship within one year from the date of
purchase, call 1-800-4-MY-HOME® to arrange for free repair.
If this product is used for commercial or rental purposes, this
warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179
TOOLS REQUIRED
(2) 9/16" Wrenches (Socket wrench may be used)
• Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
• identify and lay out parts listed above. Not all hardware
will be used. Unused parts may be discarded after
assembly.
A A
Any powerequipmentcan cause injury if operated improperly
or if the user does not understand how to operate the
equipment. Exercise caution at all times, when using power
equipment.
* Refer to your tractor owners manual for "Rules For
Safe Operation".
SINGLE ROD DECK SUSPENSION TRACTORS
IMPORTANT: If your tractor has a mower deck suspension
bracket located under the middle of the front axle as shown
in figure 1, continue with the instructions on page 3. if your
tractor does not have a mower deck suspension bracket like
the one shown go to page 4.
Look for this symbol to point out important safety
precautions. It means — Attention!! Become
alert!! Your safety is involved.
HARDWARE - FULL SIZE
Y s
J
_________
B
(not full size)
Ref.
No.
Part
No.
Qty. Description
A 48894 2 Self Threading Bolt, 3/8-16 x 1 -1/2"
B 43062 2 Hex Bolt, 3/8-16 X 1-1/2
C 43001 4 Hex Bolt, 3/8-16 X 1"
D HA21362 4 Nylock Nut, 3/8-16
E 44742 2 Plug
F 43003 4 Lock Washer, 3/8"
65932 1 Bumper