Removing blades from saw (see figs. 12 -16), Warning, Operation cont – Craftsman 286.26829 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION cont.
REMOVING BLADES FROM SAW (See Figs. 12 -16)
1. Unplug the saw and allow blades to cool.
A
WARNING:
Failure to unplug the saw could result in accidental starting
causing possible serious personal injury.
2. Rotate the blades until the holes in both blades are aligned. Then place pin
attached to the wrench through holes In blades. Unscrew Lock Nut
counterclockwise and remove (see Fig. 12).
3. Open the retractable guard (see Fig. 13).
4. Lift up and remove Blade "B” (see Fig. 14),
5. Remove the arbor adapter (see Fig. 15).
6. Lift up and remove Blade "A” (see Fig. 16),
Fig. 16
Fig. 13
...
/S'!
B
'<ff
T................T
K
Blade Guard »
Retracted
Fig, 15
a
;.,
Arbor
''
Adapter
17