Operating instructions, Operating instructions.........' -15 – Craftsman 572.61095 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

A

warning

Operating Instructions

Always pull the tool toward you!

Do

not push it! Pushing the bit

may cause it to break.

Hold the too! In a go!! grip

with the tool positioned below the attachment and the
bit pointing upwards.

On your variable speed tool, recommended tool speed
is 15.000-20,000 RPM's or speed setting 6 to avoid
damage to the bit. On your two speed tool,

recommended tool speed is "Low" to avoid damage to

the bit. Do not force the bit or put pressure on the

back of the tool to remove the grout. Let the speed of

the rotating bit do the work.

Grout Removal Safety Warnings
Wear

eye protection and dust mask. Inspect bit for

damage. When bit is installed, always run it at no-load
speed of the tool for one minute, as a damaged bit
will break apart. Do not stand in front of or in line
with bit.

Always use the tool with the depth guide positioned
flat against the material being cut.

The guide securely positioned on the material
improves stability and control of your tool.

The direction of feed with the bit info the grout is
important. Always drag or pull the bit through the

grout line. The grout bit is not intended for "plowing"
through the grout and feeding the tool in the wrong
direction will cause the bit to climb out of the work
possibly damaging the bit and/or causing loss of
control.

19

Advertising
This manual is related to the following products: