Instructions for dual suspension bracket tractors – Craftsman 486.246232 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
STEP 1: (SEE FIGURE 2)
Open parts bags labelled "A" and "B" and verify that all
parts are present.
NOTE: Place cardboard ora mat on work surface to prevent
scratching of parts removed from carton and tractor.
CAUTION! Muffler is hot! Allow engine to
cool down before proceeding with bumper
Installation.
NOTE: Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
REF PART NO. QTY.
DESCRIPTION
A
48894
2
Self Threading Screw, 3/8-16 X1-1/2"
В
43062
2
Hex Bolt, 3/8-16x1-1/2"
C
43001
2
Hex Bolt, 3/8-16x1"
D
48866
2
Pivot Spacer
E
1643-60
2
Plastic Grip
F
43003
4
Lock Washer, 3/8"
G
43070
4
Washer, 3/8"
H
44742
4
Plug
STEP 2:
(SEE FIGURE 3)
*
Remove tractor hood. (Refer to tractor manual.) Place
hood on cardboard or on a mat to protect paint.
•
If you have an (LT) Lawn Tractor with a heat shield
like the one shown, remove the heat shield.
IMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
(LT) LAWN TRACTOR
MUFFLER HEAT SHIELD
FIGURE 3