Unpacking, Contents of hardware pack, Assembly instructions – Craftsman 247.370320 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTENTS OF HARDWARE PACK
(Hardware pack may contain extra items which are not used on your unit. Part numbers are shown in
parentheses.)
I
I
I
I
I
I
I
I
I
I
I
0
INCHES
ASSEMBLY INSTRUCTIONS
NOTE: Reference to right or left hand side of the
mower is observed from behind the mower in the
operating position.
Read this manual in its entirety before attempting to
assemble or operate the lawn mower.
For shipping purposes, the lawn mower has been
assembled at the factory, except for the upper handle.
The necessary hardware is found in the hardware pack.
Before assembling or operating the mower, check for
damage and/or missing parts. Do not operate this
mower until the following steps have been completed.
UNPACKING
•
Remove the lawn mower from the carton by open
ing the top flaps and removing the carton inserts,
grass catcher, chute deflector and hardware pack.
• Cut along the corners on one end of the carton, and
lay the end of the carton down flat.
•
Roll mower out of carton. Make certain all parts and
literature have been removed from the carton before
the carton is discarded.
NOTE:
The control cord is attached to both the upper
handle and the motor. Use care in removing the mower
from the carton.