Maintenance – Craftsman 358.799380 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING YOUR UNIT AS A VACUUM
Use your unit as a vacuum to pick up

dry material such as leaves, grass,
small twigs, and bits of paper.
• For best results during vacuum use,

operate your unit at high speed.

• Move slowly back and forth over the

material as you vacuum. Avoid forc­
ing the unit into a pile of debris as

this can clog the unit.

• Keep the vacuum tube about an inch

above the ground for best results.

NOTE: If the unit becomes clogged,

stop the unit and disconnect the exten­
sion cord. Wait until the impeller has

completely stopped turning, then re­

move the vacuum tubes. Carefully
reach into the vacuum opening and
clear out the clogged debris.

CLEANING THE COLLECTION
BAG

IMPORTANT: THE COLLECTION BAG
MUST BE PROPERLY EMPTIED.

You must properly empty and main­
tain the collection bag to avoid dete­

rioration and obstruction of air flow.
Remove the collection bag from the
unit and empty after each use. Do
not store bag containing leaves,

grass, etc.
Wash the bag once a year. Remove

the bag from the blower and turn the

bag inside out. Wash the bag with a

water hose. Allow the bag to hang
and dry before you reuse the bag.

MAINTENANCE

CUSTOMER RESPONSIBILITIES

CARE & MAINTENANCE TASK

WHEN TO PERFORM

Check for Loose feisteners and parts

Before each use

Check for damaged or worn parts

Before each use

Clean unit and labels

After each use

Clean Collection Bag

Yearly

GENERALRECOMMENDATIONS

The warranty on this unit does not cov­

er items that have been subjected to
operator abuse or negligence. To re­
ceive full value from the warranty, the

operator must maintain unit as Instruct­
ed In this manual. Various adjustments

will need to be made periodically to

properly maintain your unit.

.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

• Inlet Cover
• Blower Tube
• Nozzle
• Vacuum Tubes
• Collection Bag

CHECK FOR DAMAGED OR
WORN PARTS

Refer replacement of damaged/worn

parts to your Sears Service Center.
• ON/OFFSwitch - Ensure switch func­

tions properly by moving the switch
to the Off position. Make sure motor
stops; then restart motor and contin­
ue.

AFTER EACH USE

CLEAN UNIT & LABELS
• Clean the unit using a damp cloth

with a mild detergent.

• Wipe off unit with a clean dry cloth.

YEARLY

CLEAN COLLECTION BAG
• Remove the bag and empty after

each use. Do not store bag without
emptying the bag of all contents.

• Wash the bag once a year by turning

inside out and washing with a water
hose. Be sure to let bag dry com­
pletely before re-using the unit.

9

Advertising