Your hp surestore dvd-rom rack-ready drive, Activity, Eject button – HP Surestore DVD-ROM Tape Array Module User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Your HP Surestore DVD-ROM rack-ready drive

There is one LED, an eject button and an emergency eject slot on the front panel of your DVD-

ROM drive. See page 13 for more information about loading and unloading disks and
page 17 for information about forcing ejection.

Front panel LEDs

There is one LED as illustrated in the diagram. (See figure 3.)

Activity

• flashing means the drive is reading the disk

• off is the normal state when there is no disk activity

Buttons

Media

Eject button

Push this button to unload a disk from the disk loading slot. This button does not work if the
power to the tape array is off or if a software application has disabled ejecting a disk.

HP Surestore DVD-ROM rack-ready drives can read the following formats:

DVD formats

CD-ROM formats

• DVD-ROM (read only)

• Photo CD (single and multisession)

• DVD-5 (single side, single layer) 4.7GB

• CD Extra or CD Plus (both audio and data)

• DVD-9 (single side, dual layer) 8.5GB

• Video CD

• DVD-Video (read only)

• CD-R (recordable once)

• DVD-R (write once)

• CD-RW (rewritable)

• DVD-R/W (rewritable)

• CD-ROM XA Modes 1 and 2 (concurrent

audio and video)

• CD-DA (audio only)

11

Advertising